4'' Ground Anchor

Copper swage sleeve

Stainless Steel Carabiner - M6

Galvenized Steel Eye to Eye Turnbuckles - 5"

Stainless Steel Wire Rope - 3/32"

Stainless Steel Wire Rope Thimble - M3

Battery (AGM, ~100 Ah)

Battery (AGM, ~50 Ah)

Battery (LiFePo, ~100 Ah)

Charge Controller (SS-10L-12V)

Fused Battery Leads

Mounting hardware to attach solar panel

Solar Panel (160 Watts)

Solar Panel (80 Watts)

Spade Terminal Connectors

Solar panel wiring harness (MC4)

Aluminum angle iron (units in feet)

Nylon washer - 5/16"

Stainless steel hex bolt - 7/16" (head), 1" (length)

Stainless steel hex bolt - 7/16" (head), 2" (length)

Stainless steel lock washer - 5/16"

Stainless steel nuts - 7/16"

Stainless steel lock nuts - 7/16"

Stainless steel washer - 5/16"

Pipe Bushing

Pipe Elbow

Storage bin (Action Packer)

Mast Wall mount - 24-inch

Golden nugget bracketed tower section (16-gauge)

DMX 32-Foot Medium Duty Self-Supporting Tower

DMX 48-Foot Heavy Duty Self-Supporting Tower

Base plate (BP-125)

Base plate (DMXB)

Base plate (GNBP)

Climbing guard (DMX section 6)

Climbing guard (DMX section 4)

Climbing guard (CS-GN)

Concrete slab

DMX Concrete Base Stubs (CBS-04)

DMX Concrete Base Stubs (CBS-05)

DMX Concrete Base Stubs (CBS-08)

Drive stakes (DMBS)

Guy stations (GS-GN)

Mast - 40A

Masting (DM Mast)

Top kit (244A)

Tripod

Universal house Brackets (GNHB)

VMOT-3NF Antenna Assembly

Vertical Mounting Bracket for J166R-NF, 1.0" to 2.0"

FUNcube Dongle ProPlus

USB A Extender (6")

SMA male to N female bulkhead - 15 or 30 cm

N-type dust cap

9E166-NF 9-element Yagi antenna

Pre-existing tower structure

Laird YS4306

JU400-40NM-NM Coax jumper - 40' long N-male to N-male

RPi 4B (2 GB, 4 GB, 8 GB)

Terminal block (2-position)

16 AWG ring terminal connector

16 AWG, 2-conductor wiring (100 feet)

USB A to USB micro B

USB A inline switch

USB-A DC-DC buck converter (3 A)

Adafruit GPS Hat

Pelican Case - Protector 1150

Pelican Case - Protector 1400

Adafruit Feather with SMA (RFM69HCW 433 MHz)

RPi 4G/LTE Cellular Modem Kit - EG25-G (Global)

SensorStation (Wi-Fi)

NEMA Case (NBF-32318)

SensorStation (Cellular)

SensorStation

Cellular data for SensorGnome (SixFab; monthly)

Cellular data for SensorStation (CTT; monthly)

Iridium data for SensorStation (CTT; monthly)

AC Power supply for Raspberry Pi 3 (Micro USB)

AC Power supply for SensorStation

36-Foot Standard Duty Self-Supporting Tower

Expansion eye bolts

Wedge anchor (5/8" x 4 1/2")

Large washer (11/16" ID x 1 1/2" OD)

Solar Charge Controller for LiFePo4

Raspberry Pi 4 case

USB A to USB C

Solar Panel pole mount

GPS antenna

SMA to U.fl

CR1220 battery for GPS Hat

Dual port USB wall adapter

Recessed waterproof AC outlet

50-foot 12-gauge, 3-conductor heavy duty outdoor AC extension cable

PG13.5 cable gland

Galvenized Steel Jaw to Jaw Turnbuckles - 4.5"

Stainless Steel Quick Links (3/16")

Laird PLC1996

AC Power supply (USB-C; SensorGnome)

Yellow Split Wire Loom Tubing

Duct Seal

Spray Foam

Reflective thermal insulation

Foam board insulation

Aluminum Tape

In-line wire tensioner

Electrical tape

Cable ties

Cable tie mount

Self-tapping screws (#10 x 3/4")

Deck screws (treated wood)

Lag bolts (3/8" x 3 1/2")

Metal roofing screws (1 1/2")

Cable guides

Conduit clips (1")

Type N male crimp connectors for LMR 400

Heat shrink tubing

Wi-Fi Repeater

Wi-Fi Long Range Extender

Setup

Amps

Volts

Watts

Daily Amp-hours @ 24 hr/d

Daily Watt-hours @ 24 hr/d

Charge Controller(SS-10L-12v)

0.01

12.5

0.125

0.24

3

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T )

0.03

12.5

0.375

0.72

9

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS

0.135

12.5

1.6875

3.24

40.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + USB Hub

0.11

12.5

1.375

2.64

33

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS + USB Hub

0.225

12.5

2.8125

5.4

67.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS + USB Hub + FCD ProPlus (x1)

0.305

12.5

3.8125

7.32

91.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS + USB Hub + FCD ProPlus (x2)

0.405

12.5

5.0625

9.72

121.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS + USB Hub + FCD ProPlus (x3)

0.49

12.5

6.125

11.76

147

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) - NO GPS + USB Hub + FCD ProPlus (x4)

0.59

12.5

7.375

14.16

177

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS

0.145

12.5

1.8125

3.48

43.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub

0.24

12.5

3

5.76

72

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + FCD ProPlus (x1)

0.325

12.5

4.0625

7.8

97.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + FCD ProPlus (x2)

0.415

12.5

5.1875

9.96

124.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + FCD ProPlus (x3)

0.505

12.5

6.3125

12.12

151.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + FCD ProPlus (x4)

0.595

12.5

7.4375

14.28

178.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + RTL-SDR (x1)

0.295

12.5

3.6875

7.08

88.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + BeagleBoneBlack(May-2017) + PPS-GPS + USB Hub + FCD ProPlus (x1) + RTL-SDR (x1)

0.395

12.5

4.9375

9.48

118.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT - Wi-Fi OFF

0.15

12.5

1.875

3.6

45

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi ON

0.165

12.5

2.0625

3.96

49.5

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi ON + FCD ProPlus (x1)

0.25

12.5

3.125

6

75

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi ON + FCD ProPlus (x2)

0.34

12.5

4.25

8.16

102

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi ON + FCD ProPlus (x3)

0.43

12.5

5.375

10.32

129

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi ON + FCD ProPlus (x4)

0.52

12.5

6.5

12.48

156

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi OFF + FCD ProPlus (x1)

0.24

12.5

3

5.76

72

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi OFF + FCD ProPlus (x2)

0.32

12.5

4

7.68

96

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi OFF + FCD ProPlus (x3)

0.41

12.5

5.125

9.84

123

Charge Controller(SS-10L-12v) + DC Buck converter(PYB10-Q24-S5-T ) + RaspberryPi3Bv1.2(Oct-2018) + GPS-HAT + Wi-Fi OFF + FCD ProPlus (x4)

0.5025

12.5

6.28125

12.06

150.75

Impact driver

Used for driving bolts and screws of all types and sizes

Drill

Used for drilling holes

Deep impact sockets, 1/2" drive (7/16”, 1/2", 9/16”)

Only 3 sizes needed. Important to get non-chrome plated since impact driver will cause them to chip.

Mini screw driver set

Better to get individual screwdrivers than interchangeable bits since it's easy to loose pieces.

Hole saw (2 1/2")

Important to get hole saw with the right-fitting shaft

Hex socket bit (1/4" and 5/16")

Used with hose clamps (1/4") and self-tapping screws (5/16")

Hex socket adapter (1/2")

Attaches to impact driver for use with deep impact sockets.

Impact Bit Set

Mainly for Roberson's (square) and Phillip's (cross) bits. It's handy to have multiple of each on a holder like this (with a carabiner).

Automatic wire strippers

There are two varieties that exist - either will work.

Wire rope cutter

For cutting guy wire. Don't go cheap with these - get the expensive ones!

Channel locks

Handy for all sorts of things. Get a brand name pair - non-brand versions can be very frustrating to use

Wrenches (7/16”, 1/2", 9/16”)

Helpful to have in addition to the sockets. Don't get the ratcheting wrenches.

Rotary Hammer

For drilling into rock or concrete. Fits SDS plus bits.

Dewalt batteries (Spares)

Always have lots of spares ready and charged.

SDS plus masonry bit (5/8” x 6")

For drilling in anchors to rock or concrete

Swage tool

For crimping guy wire sleeves

Bolt cutters

Sometimes bolts get cross-threaded and need to be cut off.

Level

For making sure the tower structure is vertical.

Compass or compass app on phone

To checking antenna directions.

Mini sledge

To drive in anchors. Also helpful for moving stubborn housing brackets.

Phillips (cross) screwdriver

Drill bit kit (Cobalt)

For drilling pilot holes or bolt holes.

Clear plastic tubing (3/8" , 12" long)

To clear dust from holes drilled into rock or concrete

Safety Glasses

Use whenever using drill or rock hammer, or when working under someone.

N-95 masks

Use whenever drilling into rock or concrete.

Tape measure

For measuring!!

In-line wire tensioner tool

Makes tensioning guy wires a whole lot easier.

Ratchet (1/2" drive)

A backup for impact driver as well as in-line wire tensioner tool

Coax Wire Stripper

Used for thinner coax cables, such as RG58

LMR400 Wire Stripper

Used exclusively for LMR400

Ratcheting Coax Crimper

For crimping on coax connectors

Spade bits (1/2" and 1 1/2")

For drilling holes through walls to allow for AC extension cord (1/2") or coax cables (1 1/2").

Tool belt

There are several different styles - get one that suits you the best!

Tool belt drill holster

Tool box

For storing tools!

Parts organiser

For sorting all the various nuts and bolts

Utility Knife

Mainly to open boxes and packages

Wire cutter

Snipping wires, cutting of cable tie ends, etc.

Digital Multimeter

To check voltages of solar setup, continuity, and wire resistance.

Contactless AC circuit tester

For checking if outlets are working and to see if there are wires within walls.

USB to ethernet adapter

Needed for wired connection to SensorStation. May also be needed if laptop is missing Ethernet port.

Ethernet cable

For wired connection to SensorGnome or SensorStation.

USB flash drive

Used for downloading data or configuring Wi-Fi on SensorStations

Soapstone Marker

To mark measurements on metal. Also called a welder's marker.

Flagging tape

Can be helpful when transporting large items, also for flagging certain tools so it doesn't get lost in the field.

NanoVNA

Used as an antenna analyser. Can check whether an antenna is damaged/unsuitable for use.