| Part | Description | Image |
|---|---|---|
4'' Ground Anchor
Copper swage sleeve
Stainless Steel Carabiner - M6
Galvenized Steel Eye to Eye Turnbuckles - 5"
Stainless Steel Wire Rope - 3/32"
Stainless Steel Wire Rope Thimble - M3
Battery (AGM, ~100 Ah)
Battery (AGM, ~50 Ah)
Battery (LiFePo, ~100 Ah)
Charge Controller (SS-10L-12V)
Fused Battery Leads
Mounting hardware to attach solar panel
Solar Panel (160 Watts)
Solar Panel (80 Watts)
Spade Terminal Connectors
Solar panel wiring harness (MC4)
Aluminum angle iron (units in feet)
Nylon washer - 5/16"
Stainless steel hex bolt - 7/16" (head), 1" (length)
Stainless steel hex bolt - 7/16" (head), 2" (length)
Stainless steel lock washer - 5/16"
Stainless steel nuts - 7/16"
Stainless steel lock nuts - 7/16"
Stainless steel washer - 5/16"
Pipe Bushing
Pipe Elbow
Storage bin (Action Packer)
Mast Wall mount - 24-inch
Golden nugget bracketed tower section (16-gauge)
DMX 32-Foot Medium Duty Self-Supporting Tower
DMX 48-Foot Heavy Duty Self-Supporting Tower
Base plate (BP-125)
Base plate (DMXB)
Base plate (GNBP)
Climbing guard (DMX section 6)
Climbing guard (DMX section 4)
Climbing guard (CS-GN)
Concrete slab
DMX Concrete Base Stubs (CBS-04)
DMX Concrete Base Stubs (CBS-05)
DMX Concrete Base Stubs (CBS-08)
Drive stakes (DMBS)
Guy stations (GS-GN)
Mast - 40A
Masting (DM Mast)
Top kit (244A)
Tripod
Universal house Brackets (GNHB)
VMOT-3NF Antenna Assembly
Vertical Mounting Bracket for J166R-NF, 1.0" to 2.0"
FUNcube Dongle ProPlus
USB A Extender (6")
SMA male to N female bulkhead - 15 or 30 cm
N-type dust cap
9E166-NF 9-element Yagi antenna
Pre-existing tower structure
Laird YS4306
JU400-40NM-NM Coax jumper - 40' long N-male to N-male
RPi 4B (2 GB, 4 GB, 8 GB)
Terminal block (2-position)
16 AWG ring terminal connector
16 AWG, 2-conductor wiring (100 feet)
USB A to USB micro B
USB A inline switch
USB-A DC-DC buck converter (3 A)
Adafruit GPS Hat
Pelican Case - Protector 1150
Pelican Case - Protector 1400
Adafruit Feather with SMA (RFM69HCW 433 MHz)
RPi 4G/LTE Cellular Modem Kit - EG25-G (Global)
SensorStation (Wi-Fi)
NEMA Case (NBF-32318)
SensorStation (Cellular)
SensorStation
Cellular data for SensorGnome (SixFab; monthly)
Cellular data for SensorStation (CTT; monthly)
Iridium data for SensorStation (CTT; monthly)
AC Power supply for Raspberry Pi 3 (Micro USB)
AC Power supply for SensorStation
36-Foot Standard Duty Self-Supporting Tower
Expansion eye bolts
Wedge anchor (5/8" x 4 1/2")
Large washer (11/16" ID x 1 1/2" OD)
Solar Charge Controller for LiFePo4
Raspberry Pi 4 case
USB A to USB C
Solar Panel pole mount
GPS antenna
SMA to U.fl
CR1220 battery for GPS Hat
Dual port USB wall adapter
Recessed waterproof AC outlet
50-foot 12-gauge, 3-conductor heavy duty outdoor AC extension cable
PG13.5 cable gland
Galvenized Steel Jaw to Jaw Turnbuckles - 4.5"
Stainless Steel Quick Links (3/16")
Laird PLC1996
AC Power supply (USB-C; SensorGnome)
Yellow Split Wire Loom Tubing
Duct Seal
Spray Foam
Reflective thermal insulation
Foam board insulation
Aluminum Tape
In-line wire tensioner
Electrical tape
Cable ties
Cable tie mount
Self-tapping screws (#10 x 3/4")
Deck screws (treated wood)
Lag bolts (3/8" x 3 1/2")
Metal roofing screws (1 1/2")
Cable guides
Conduit clips (1")
Type N male crimp connectors for LMR 400
Heat shrink tubing
Wi-Fi Repeater
Wi-Fi Long Range Extender
